RUN SILENT

$99,000

 Advantages of Supercritical CO2 Extraction with a Infinity Supercritical System

​

Advantages with Infinity:

​

-Simplicity: because our systems are not automated, you do not have to

worry about software updates, system shutdowns (in the middle of a run

due to power failure or software hickups), or problematic pressure

control. No noisy air compressor needed. Runs silent.

​

-Full Automation: After consulting with more Cannabis extraction

professionals, we have decided against moving forward with full

automation. Our customers are getting such great results with a

semi-automated system, we believe it is not advantageous to deploy

fully automated PLC systems. After talking with several Apeks

customers, we do not believe that a fully automated system, is the

best choice for a production Cannabis oil operation.

​

-FlowBar: we distribute CO2 over the length of the extraction vessel,

and from the inside of the Cannabis to the outside. The result is a

much faster, and complete extraction. This means that you can run

through 2-4 times more cycles than with the same size competition.

With our system, you can do a extraction cycle in 1-3 hours. Faster

extraction means more profit, so your payback is even faster with our

system. To be conservative, just plan on a 3 hour extraction time, and

experiment with your actual extraction time.

​

-Electro-Static Precipitation System: we use the action of the CO2

flowing over food-grade Teflon to produce a passive static charge. The

tribo-effect charges the oil entrained in the CO2 gas so that it

sticks to the first contact, which is the first collection vessel.

Better collection equals less or minimal carry-over, which reduces

pump maintenance.

​

-Simplified Pump Maintenance - Bolt on Pump Cleaning System: we are

now offering a optional bolt-on pump cleaning device, which when

hooked up to the luquid CO2 pump will clean moving parts of the pump,

and the pump seals, in place. The closed-loop cleaning systems uses

ethanol, and the botanical oil cleaned from the pump can be recovered

using a rotovap, or botanical oil filter.

​

-Tube Size: we use 1/4 to 1/2 inch Swagelok tubes and components,

which allow better flow of the CO2.

​

-Silent CO2 Pump: we use a highly-modified industrial liquid CO2 pump,

which runs using a motor. Operation is silent. Our extensive

modification means very minimal maintenance, and seal replacement can

be done by removing the pump head (about 5 minutes), cleaning the

pistons (about 10 minutes), and replacing seals (about 10 minutes).

​

-No Loud Air Compressor: we do not need, nor use, a external pneumatic air

compressor (or additional chiller to cool the compressor which gets

hot from use). Compressor is so loud, that most systems which require

it, will need a separate room because it's so noisy. Noise produces

extractor technician fatigue.

​

-Swagelok Back Pressure Valve: we use a very precise BVP, which allows

us to achieve very accurate pressures. We do not use valveless

technology, which produces pressure swings.

​

-CO2 Preheat: we use a heat exchanger on our motor-to-pump gearbox,

which preheats the CO2 before it gets into the extraction vessel. By

using the heat (byproduct of the gearbox), we are conserving energy

and preheating the CO2.

​

-Pressure and Heat Zone Feedback PID: we use compact PLCs to control

the pressure (with a feedback loop via digital sensor) and three zone

heat monitor, control, and feedback.

​

-Less Complicated: the system we have is modular, on a sturdy

industrial bolt-together frame, with casters, and can be wheeled

through any standard door, hallway, or elevator. The modular cart is

24 inches wide, by 48 inches long, by 71 inches in height. You will

notice the clean lines, minimal tubing, and logical layout of the

components.

​

-Less Stuff Needed to Run: our system requires a liquid CO2 supply

(cylinders), and a small chiller. That's it. No air compressor, or

items to support that compressor.

​

-Quality Extract Best Oil: our customers who perform extraction, say that their

ultimate customers rave about the quality and aroma of the extracted

oil. The quality terpenes that are extracted and ultimately preserved,

make the end-user experience a quality one.

​

-New Technology: we're working on a solid state chiller (bolt-on),

energy saver heating/cooling technology, acoustical ultrasonics, and

other advanced technology, which not only enhance the operator

experience, but will reduce cycle time, while increasing quality of

extract. The bottom line is to save you time, and increase production,

which result in more profit. We are also working on SDR (Spinning Disc

Reactor) technology which will allow continuous flow processing, and

without pressure or CO2.

​

-Price: we have the best system pricing in the market.